(No reviews yet)

ColorSource Linear 2

$1,890.00
SKU:
7414A10vv
Share

An LED luminaire crafted by lighting experts, the ColorSource Linear is contained in a strip light, or batten, form factor and uses the same proportionate recipes of red, green, blue, and lime LEDs as the ColorSource PAR. This creates a color range and richness only possible from ETC LED luminaires. The Linear fixture was designed to allow multiple fixtures to be mounted end to end with no visible break in light. The ColorSource Linear lives up to ETC's high standards for quality. Available in original or Deep Blue arrays and in half meter, 1 meter, and 2 meter lengths.

PRODUCT FEATURES

• Available in three lengths
- Linear 1 (0.5 Meters) - one cell of control
- Linear 2 (1 Meter) - two cells of control
- Linear 4 (2 Meters) - four cells of control
• ETC’s RGB-L chipset (Red, Green, Blue and Lime)
- Available in Original or Deep Blue
• Homogenized optics
• Simple user interface with seven-segment display
• PowerCon in and thru power connections
• DMX in and thru (5-pin XLR or RJ45)
• RDM or local configuration
• LED droop compensation for consistent output
• Optically calibrated
• Tour-ready, aluminum housing

SPECIFICATIONS GENERAL
• RGB-L chipset color-mixing wash luminaire with eight emmitters
• IP20-rated for indoor use
• Power- and DMX-in/thru connections for simple setup
• Seven-segment, three-button interface
• 12 onboard, customizable presets and five sequences
PHYSICAL
• Rugged, die-cast, aluminum housing
• Two secondary lens slots
• Available in black, white or silver - Custom colors available upon request (contact ETC)
• Trunnions included
ELECTRICAL
• 100VAC to 240VAC 50/60Hz universal power input
• PowerCon in and thru power connections
• Up to 9 cells (0.5 meter segments, 15A max) may be linked via power thru connector
• Up to 10 cells (0.5 meter segments) total per circuit when used with ETC R20 relay module or Unison® Echo Relay Panel.
- Consult breaker trip curves when used with other equipemnt
• Requires power from a non-dimmable source
• Inrush (Linear 1/Linear 2/Linear 4):
- 120V: 35A/35.6A/67.5A (First half-cycle)
- 240V: 49A/85.6A/153A (First half-cycle)
• ETL Listed to UL1573
LED*
• 20,000-hour LED life (at 70% intensity)
• 40 Luxeon® Z LED emitters (five per optic)
*See additional LED notes and photometrics on page 3
COLOR
• Exclusive RGB-L Color array
- Also available in Deep Blue array
• Unparrallelled brightness and color range
• Droop compensation maintains color accuracy during use
• Optically calibrated to ensure consistency across fixture
OPTICAL
• Homoginized optics for a consistent, smooth beam
• Primary field angle of 24.9° and beam angle of 14.5°
• Secondary lenses available for multiple beam-spread options. Refer to accessories charts for lenses available
CONTROL
• DMX512 in and thru via five-pin XLR or RJ45 connectors (End-of-line termination required)
• RGB, IRGBS, Direct and single channel control (See DMX control table for additional information)
• 15-bit virtual dimming engine provides smooth, high-quality theatrical fades
• RDM support for address and setting changes
• Local control of presets (12) and sequences (5)
THERMAL
• Luminiare is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housingAmbient operating temperature of 32° to 104°F (0° to 40°C)
• Active electronic thermal management using variable-speed fan

ColorSource Linear 2 Reviews

This product does not have any reviews yet

Customers Also Viewed