CHAUVET Professional
$399.99
RDMX Splitter 8 is a versatile RDM and 5-pin DMX opto-splitter with a rugged, durable housing. It features 8 outputs and 2 inputs, so it can instantly go from a 1×8 splitter to a 2×4 splitter for two different universes. To...
Lex
$28.00
Type: 5 Pin Male to 3 Pin Female Adapter Male Plug: 5 Pin XLR Neutrik black/gold Cable: Dual twisted pair with shields 22 AWG Black Polyurethane jacket, 1 ft Female Connectors: 3 Pin XLR Neutrik black/gold
Lex
$18.00
DMX terminators are designed to be plugged into the last outlet on a DMX daisy chain. Terminators reduce reflected signal noise, allowing proper DMX communication at longer cable lengths. Resistance: 120 Ohms
Lex
$16.00
DMX terminators are designed to be plugged into the last outlet on a DMX daisy chain. Terminators reduce reflected signal noise, allowing proper DMX communication at longer cable lengths. Resistance: 120 Ohms
ETC
$18.90
5-Pin Male DMX Terminator. Used to terminate DMX lines at the end of the run by placing in the Thru DMX port of the last unit in line.
ETC
$18.90
RJ45 DMX Terminator. Used to terminate DMX lines at the end of the run by placing in the Thru DMX port of the last unit in line. This particular terminator is designed for use in units that use DMX over Cat5.
ETC
$9.90
Cable used to adapt DMX lines from Cat5 to 5-pin XLR. This particular unit has a Male XLR connector.
ETC
$9.90
Cable used to adapt DMX lines from Cat5 to 5-pin XLR. This particular unit has a Female XLR connector.
ETC
$135.00
The ETC 25’ PowerCon to Edison Cable is designed for use with the Source Four LED Fixtures and the Desire Series D40 & D60 Fixtures. This input power cable features an inline switch.   Length 25.0' (7.6 m)
ETC
$90.00
The 24.9' Molex Female to Bare Ends Converter Cable from ETC is an extension power cable that is designed for use with the ETC Selador Desire D40XT Studio Fixture.   Length 24.9' (7.6 m)
ETC
$32.40
The 4.9' Molex Female to Bare Ends Converter Cable from ETC is an extension power cable that is designed for use with the ETC Selador Desire D40XT Studio Fixture.   Length 4.9' (1.5 m)
ETC
$67.50
This ETC powerCON to Bare End Cable is a replacement cord that fits any piece of equipment that takes a powerCON power cable.
Lex
$23.55
Lex power adapters make a solution for any cable situation.
Lex
$30.00
Type: 3 Pin Male to 5 Pin Female Adapter Male Plug: 3 Pin XLR Neutrik black/gold Cable: Dual Twisted Pair w/ shields 22 AWG Black Polyurethane jacket, 1ft Female Connectors: 5 Pin XLR Neutrik black/gold