ETC
$67.50
This Selador Trunnion / Floor Stand Kit is designed for the Selador Series of Lustr, Paletta, Vivid Fire and Ice and Vivid-R LED fixtures. Kit comes with a set of 2 stands with hardware.
ETC
$3.15
The ETC C-Clamp Adapter for Source Four Mini is a spare or replacement for the one that ships with the SourceFour Mini and Source Four Mini LED. Smaller than the clamp that ships with the full-sized Source Four, this...
ETC
$14.40
 The black Miniature C-Clamp from ETC is designed to mount the Source 4 Mini LED Fixture on the ceiling.          
ETC
$9.90
UL listed Source Four fixtures are supplied with a safety cable, for which the ETC part number is 7060A1022. This cable is a 30" long 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load of...
ETC
$18.90
400CC C Clamp for ETC Source 4 Ellipsoidal Spotlights -- replacement for original equipment included with any Source 4 spotlight. It mounts and locks onto a grid pipe, and includes an M12 thread screw for the fixture yoke.
Altman
$16.80
The stagehand wrench accommodates the most commonly used bolt heads and T-handles found on theatrical luminaires and equipment.   Click to download Altman Stage Accessories Brochure
Rosco
$45.15
One of the most common problems on stage is how to quickly brake and then release rolling scenery. Rosco's Wagon Brake provides secure holding power, as well as fast, quiet releasing without the need for drilling holes in the stage floor. Mounted to the...
Rosco
$26.00
One of the most common problems on stage is how to quickly brake and then release rolling scenery. Rosco's Wagon Brake provides secure holding power, as well as fast, quiet releasing without the need for drilling holes in the stage floor. Mounted to the...
Rosco
$72.30
The Sure Clamp has a grip range of 1-1/4" to 2" (3.8cm - 5.1cm) and is used to hang lighting fixtures or scenery directly to pipes. An extra-secure substitute for the standard C-Clamp, it closes automatically when weight is hung on it and is further...
Rosco
$9.20
Stage Screws are used to fasten flats or scenery pieces to the stage floor. The Stage Screw goes directly into the wood stage floor. The Steel Stage Screw should be used when the screw must be used in the same place several times, or where exceptional...
Rosco
$37.50
Sandbags have long been used for a variety of stage purposes; most often as a portable and adjustable counterweight method for hemp rigging. Sandbags are also frequently used to weight floor plates for stage bracing and to secure scenery or props. These...
Rosco
$5.80
Three types and sizes available 1.5" (3.8 cm) Tight Pins or Loose Pins 2" (5 cm) Tight Pins or Loose Pins Sure Hinge   Loose Pin Hinges Solid steel pins and hinge metal Excellent twist strength Pins are full length one...
Rosco
$4.75
The diverse items shown here are all used to secure scenery either to the stage floor or for flying or hanging. While the techniques for flying scenery (lifting it above the proscenium opening) vary, the flattage usually needs to be lifted by a wire rope...
Rosco
$15.75
Manufactured out of hickory and featuring an easy-grip handle, these belaying pins are designed to be inserted into the rail of hemp rigging systems to form a cleat for securing lift lines. If the lines are tied off on the cleat properly, using the...
Global Truss
$19.95
Heavy Duty Hook Style Clamp For 50mm Tubing Compatible with F31-F32-F33-F34-F44P Truss Minimum Tubing Diameter 48mm Maximum Tubing Diameter 51mm Max Load Capacity 250 kgs. - 550 lbs. Unit Weight - 1.02 lbs. TUV Approved
Global Truss
$26.95
Heavy Duty Dual Swivel Clamp For 50mm Tubing Compatible with F31-F32-F33-F34-F44P Truss Minimum Tubing Diameter 48mm Maximum Tubing Diameter 51mm Max Load Capacity 500 kgs. - 1100 lbs. TUV Approved Unit Weight 2.25 lbs.
Global Truss
$17.95
Heavy Duty Clamp For 50mm Tubing Compatible with F31-F32-F33-F34-F44P Truss Minimum Tubing Diameter 48mm Maximum Tubing Diameter 51mm Max Load Capacity 500 kgs. - 1100 lbs. TUV Approved Unit Weight 1.15 lbs.
Global Truss
$15.95
Medium Duty Clamp For 50mm Tubing Compatible with F31-F32-F33-F34-F44P Truss Minimum Tubing Diameter 48mm Maximum Tubing Diameter 51mm Max Load Capacity 200 kgs. - 440 lbs. TUV Approved Unit Weight 0.78 lbs.
Global Truss
$4.95
LIGHT DUTY MINI C-CLAMP MAX LOAD CAPACITY 35 KGS (75 LBS) UNIT WEIGHT 1 LBS.
Global Truss
$6.95
Medium Duty Clamp for 35mm Tubing Compatible with F23-F24 Truss Minimum Tubing Diameter 32mm Maximum Tubing Diameter 35mm Max Load Capacity 75 kgs. - 165 lbs. TUV Approved Unit Weight 0.28 Lbs.